• Mon. Sep 26th, 2022

    How to contact the customer service of Dafa Electronics

    ByGoodBoy

    Sep 22, 2022
    5 thoughts on “How to contact the customer service of Dafa Electronics”
    1. Today, optical fiber has entered the household, and now the fiber has begun to replace ADSL, becoming the most mainstream Internet way. However, many people always encounter some problems when using optical fiber connection routers. And using routers to share the network, this is the demand for many families. So how does the fiber connect the wireless router correctly? If you are still troubled by this problem, then the two methods compiled by the following editors will tell you how to operate correctly from two aspects. Methods (1) 1. Connection of the hardware part: Use a network cable to connect any network port of the light cat with the WLAN port of the wireless router. Other computers in the LAN need to access the Internet by wired. It can be connected to the LAN port of the wireless router online. 2. Set the IP address of the router. Open the browser on the computer connected to the router, enter the router to control the address and return to the car, find "network settings" → "LAN port settings, re -set the router's IP to" 192.168.2.1 ", and then Click "Save" to complete the setting of the IP address of the router. 3. Find "Network Settings" → "WAN Port Settings" in the open page, and set the router's "WAN port connection type" Internet account and password, check the "dial -up" method, click "Save" to complete the WAN settings of the router. 4. Find the "DHCP server" → "DHCP service" in the open page, select the DHCP server, and add the address to the address The beginning address of the pool is set to "192.168.2.100", the address of the address pool is set to "192.168.2.199", click "Save" to complete the DHCP settings of the router 5. The final configuration connects to each device on the wireless router. Configure its IP IP. The address acquisition method is available automatically. Method (2) 1. First, the network cable (modem) end of the Modem side and the WAN interface on the router (this interface usually distinguishes the interface of several other similar appearances) as shown in the figure: Note: Note: For example, some community broadband and other direct -entry of a network cable do not need a network connection method that does not require the MODEM connection, and directly connect this network cable to the WAN interface. 2. Another one to prepare any one of the 4 LAN ports (the yellow interface in the figure below) , On the other end, connect to the computer intersection. (If you use wireless ways, please skip) 3. Connect the power cord of the MODEM and the router, and turn on the switch (some brand devices are connected and automatically start, no switch), and the hardware connection of the above router. Just complete

    2. In the obsession, unable to extricate yourself. If you are holding a purely playing game, you can definitely enjoy the sweet drip fruit at the end, get 6xh, ρW, and immediately

    Leave a Reply